Duplexer
■ RELIABILITY DATA
1. Terminal stregth
Specified Value
No damage to be found.
Bend width 4mm, hold for 5±1 sec.
according to IEC60068-2-21(JISC60068-2-21)
Test Methods and
Remarks
2. Mechanical shock
Specified Value
Test Methods and
Remarks
3. Vibration
Specified Value
Test Methods and
Remarks
4. Drop 1
Specified Value
Test Methods and
Remarks
5. Drop 2
Specified Value
Test Methods and
Remarks
After testing, meet the specified characteristics at a room temperature.
Apply 14700m/s 2 for 0.5ms 5 times for each of 6 directions.
according to IEC68-2-27(JISC60068-2-27).
After testing, meet the specified characteristics at a room temperature.
With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s 2 of acceleration at 55 to 500Hz, apply a
vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)
After testing, meet the specified characteristics at a room temperature.
Drop 3 times onto concrete floor from the height of 1.0m.
After testing, meet the specified characteristics at a room temperature.
Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.
6. Temperature cycling
Specified Value
Test Methods and
Remarks
7. Static humidity
Specified Value
Test Methods and
Remarks
After testing, meet the specified characteristics at a room temperature.
Temp. range -40 to +100℃. 500cycle.
After testing, meet the specified characteristics at a room temperature.
+85℃, 90% to 95%RH, apply DC5V, 1000hours.
8. High temperature storage life
Specified Value
Test Methods and
Remarks
After testing, meet the specified characteristics at a room temperature.
+100℃, 1000hours.
9. Low temperature storage life
Specified Value
Test Methods and
Remarks
After testing, meet the specified characteristics at a room temperature.
-40℃, 1000hours.
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_reli_e-E02R01
相关PDF资料
D75A-020.0M-T OSC TCXO 20.000 MHZ 3.3V SMT
D75AS-020.0M-T OSC TCXO 20.000 MHZ 3.3V SMT
D75F-013.0M OSC TCXO 13.000 MHZ 3.3V SMD
D75J-040.0M-T TCXO 40.00000 MHZ 3.3V LVCMOS
D7G0511S SWITCH ROTARY 5P-11POS OPEN FRM
D8G0817N SWITCH ROT 8P 2-17 ACTIVE POS
D9G0723N SWITCH ROTARY 7P-23POS OPEN FRM
DA12T RIGHT-ANGLE DIP SWITCH
相关代理商/技术参数
D5NF878M0P1ET-Z 功能描述:信号调节 SAW DPLXR CDMA2000 BC0+10 2520 BAL RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
D5NK50Z 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:N-CHANNEL500V-1.22W-4.4ATO-220/FP/DPAK/IPAK/I2PAK Zener-Protected SuperMESH Power MOSFET
D5NL782M0P1JZ-Z 功能描述:信号调节 SAW DUPLEXER BAND XIII SV-LTE 3025 BAL RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
D5NL881M5P1HY-Z 功能描述:信号调节 SAW DUPLEXER BAND V/BC0 SVLTE 3025 BAL RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
D5PA1 制造商:CUTLER HAMMER/EATON 功能描述: 制造商:Eaton Corporation 功能描述:
D5PA2 制造商:Eaton Corporation 功能描述:RELAY SOCKET SCREW TERM; DIN OR PANEL MTG; D5 ?? 制造商:Eaton Corporation 功能描述:CONTROL RELAYS AND TIMERS
D5-PB35 制造商:Southco 功能描述:
D5-PB35SS 制造商:Southco 功能描述: